
SuperCharge Batteries offer longer life, more power and performance with maximum durability and reliability.
With over 95 years experience Ramcar produces SuperCharge in its world-class facilities in the Philippines.
The SeaMaster marine battery range is the leader in marine batteries. With Expanded Grid Technology (EXG), exceptional marine cranking (MCA) and energy/capacity (RC and AH), the SeaMaster gives boating enthusiasts the power needed to meet the demands of their marine application and optimal vibration resistance to meet the challenges of rough seas.
What is so special about EXG? The benefits are many. The construction of the calcium plates in super compressed rolled strips creates a dense grid pattern allowing for a more compact unit. It is less susceptible to heat corrosion and delivers more efficient cranking power. Also, as the EXG plates are shorter and have minimal gassing, there is less water loss and no acid top up is required.
Compared to ordinary gravity-cast grids, EXG calcium grids have a more compact grain structure and are inherently stronger. This makes them less prone to heat and corrosion and ensures a more efficient current conductivity and cranking power, as substantiated by the battery’s superior specification ratings.

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut

AP: Automotive Post
CV: Central Venting
CT: Centered Terminal
DFA: Dual Fit Aligned Terminals
DFP: Dual Fit Parallel Terminals
DST: Dual System Terminals
DT: Automotive Post & Stud
DWNT: Dual Wingnut
EL: End Ledge
ELPT: Embedded Low Profile
EUTR: Embedded Universal/Reverse
F1: F1 Terminal
F1-F2: F1/F2 Terminal
F2: F2 Terminal
F3: F3 Terminal
F3W: F3W Terminal
F5: F5 Terminal
F8: F8 Terminal
F9: F9 Terminal
F10: F10 Terminal
F10M8: F1 Terminal (1.25mmx15mm Stud I))
F11: F11 Terminal
F11M6: F11 Terminal (6mm/8mm Insert)
F12: F12 Terminal
F12M8: F12 Terminal (1.25mmx15mm Stud I)
F13: F13 Terminal
F14: F14 Terminal
F14M8: F14 Terminal (1.25mmx15mm Stud I)
F18: F18 Terminal
F22: F22 Terminal
F3: F3 Terminal
F5: F5 Terminal
F9: F9 Terminal
FL: Front Ledge
FDH: Fold Down Handles
HE: Hydrometer Eye
M6: M6
M8: 1.25mmx15mm Stud I
M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)
OLT: Offset Lug Terminal
PT: Pencil Terminal
RT: Recessed Terminal
RPH: Rope Handles
RTH: Retractable Handles
STD: Standard Terminal
ST: Side Terminal
TS: Top Stud Terminal
UT: Universal
WNT: Wingnut
12V 60AH Marine Battery
The MFM48 is a premium marine battery designed to deliver reliable starting power and consistent performance in demanding marine environments. Built with enhanced maintenance-free technology, it eliminates the need for regular upkeep while ensuring dependable energy output whenever you need it. Whether you're powering a boat engine or onboard accessories, the MFM48 provides stable and efficient performance on the water.
Engineered with a vibration-resistant construction, the MFM48 is built to withstand harsh marine conditions, including rough waters and constant movement. Its robust internal design ensures long-lasting durability and strong starting capability, backed by a 24-month warranty for added peace of mind. The MFM48 is a dependable choice for boat owners who need reliable, maintenance-free power at sea.
Enhanced maintenance free
Vibration resistant
Reliable starting power
The Supercharge MFM48 Battery is available through our nationwide dealer network across Australia. Contact your local store for pricing, availability, and professional advice.
Find a DealerExplore our full range of marine application batteries designed for reliable performance on the water.
Browse Marine Batteries| Size | A46 |
| Volts | 12V |
| Technology | SMF CAL |
| CCA | 575 |
| RC | 105 |
| AH | 60 |
| Length, mm | 233 |
| Width, mm | 173 |
| Height, mm | 182 |
| Total Height, mm | 221 |
| Assembly | D |
| Post Type | DFA |
| Ledge | EL & FL |
| Accessibility | TS |
| Hydro Eye | YES |
| Base Warranty (Private Use) | 24 months |
| Warranty (Commercial Use) | 24 months |
| AP | Automotive Post | CV | Central Venting |
| CT | Centered Terminal | DFA | Dual Fit Aligned Terminals |
| DFP | Dual Fit Parallel Terminals | DST | Dual System Terminals |
| DT | Automotive Post & Stud | DWNT | Dual Wingnut |
| EL | End Ledge | ELPT | Embedded Low Profile |
| EUTR | Embedded Universal/Reverse | F1 | F1 Terminal |
| F1-F2 | F1/F2 Terminal | F2 | F2 Terminal |
| F3 | F3 Terminal | F3W | F3W Terminal |
| F5 | F5 Terminal | F8 | F8 Terminal |
| F9 | F9 Terminal | F10 | F10 Terminal |
| F10M8 | F1 Terminal (1.25mmx15mm Stud I) | F11 | F11 Terminal |
| F11M6 | F11 Terminal (6mm/8mm Insert) | F12 | F12 Terminal |
| F12M8 | F12 Terminal (1.25mmx15mm Stud I) | F13 | F13 Terminal |
| F14M8 | F14 Terminal (1.25mmx15mm Stud I) | F14 | F14 Terminal |
| F18 | F18 Terminal | F22 | F22 Terminal |
| FL | Front Ledge | FDH | Fold Down Handles |
| HE | Hydrometer Eye | M6 | M6 |
| M8-DT | Automotive Post & Stud (1.25mmx15mm Stud I) | M8 | 1.25mmx15mm Stud I |
| OLT | Offset Lug Terminal | PT | Pencil Terminal |
| RT | Recessed Terminal | RPH | Rope Handles |
| RTH | Retractable Handles | STD | Standard Terminal |
| ST | Side Terminal | TS | Top Stud Terminal |
| UT | Universal | WNT | Wingnut |
| A (6 Volts) |
|
| C (12 Volts) |
|
| D (12 Volts) |
|
| E (12 Volts) |
|
| F (12 Volts) |
|
| G (12 Volts) |
|
| H (12 Volts) |
|
| Make | Model | Year |
Yes, the MFM48 is specifically designed as a marine battery for boating applications.
No, it features enhanced maintenance-free technology for hassle-free operation.
Yes, it is built with a vibration-resistant design for durability in rough marine conditions.
The MFM48 comes with a 24-month warranty for added reliability and peace of mind.
Current Selection
12V 60AH Marine Battery
Need to find a compatible battery for your vehicle?
Find a Battery
12V 80AH Marine Battery
The MFM50 is a high-quality marine battery designed to deliver reliable starting power and dependable performance in demanding marine environments. Built with enhanced maintenance-free technology, it eliminates the need for regular servicing while ensuring consistent energy output for boat engines and onboard electrical systems. Whether you're out on coastal waters or inland lakes, the MFM50 provides steady and efficient power when it matters most.
Engineered for durability, the MFM50 features a vibration-resistant construction that helps it withstand rough marine conditions and constant movement. Its robust internal design ensures long-lasting reliability and strong cranking performance, making it ideal for marine applications. Backed by a 24-month warranty, the MFM50 offers peace of mind and dependable power for every boating adventure.
Enhanced maintenance free
Vibration resistant
Reliable starting power
The Supercharge MFM50 Battery is available through our nationwide dealer network across Australia. Contact your local store for pricing, availability, and professional advice.
Find a DealerExplore our full range of marine application batteries designed for reliable performance on the water.
Browse Marine Batteries| Size | NS70 |
| Volts | 12V |
| Technology | SMF CAL |
| CCA | 700 |
| RC | 150 |
| AH | 80 |
| Length, mm | 259 |
| Width, mm | 173 |
| Height, mm | 202 |
| Total Height, mm | 222 |
| Assembly | D |
| Post Type | DST |
| Ledge | FL |
| Accessibility | TS |
| Hydro Eye | YES |
| Base Warranty (Private Use) | 24 months |
| Warranty (Commercial Use) | 24 months |
| AP | Automotive Post | CV | Central Venting |
| CT | Centered Terminal | DFA | Dual Fit Aligned Terminals |
| DFP | Dual Fit Parallel Terminals | DST | Dual System Terminals |
| DT | Automotive Post & Stud | DWNT | Dual Wingnut |
| EL | End Ledge | ELPT | Embedded Low Profile |
| EUTR | Embedded Universal/Reverse | F1 | F1 Terminal |
| F1-F2 | F1/F2 Terminal | F2 | F2 Terminal |
| F3 | F3 Terminal | F3W | F3W Terminal |
| F5 | F5 Terminal | F8 | F8 Terminal |
| F9 | F9 Terminal | F10 | F10 Terminal |
| F10M8 | F1 Terminal (1.25mmx15mm Stud I) | F11 | F11 Terminal |
| F11M6 | F11 Terminal (6mm/8mm Insert) | F12 | F12 Terminal |
| F12M8 | F12 Terminal (1.25mmx15mm Stud I) | F13 | F13 Terminal |
| F14M8 | F14 Terminal (1.25mmx15mm Stud I) | F14 | F14 Terminal |
| F18 | F18 Terminal | F22 | F22 Terminal |
| FL | Front Ledge | FDH | Fold Down Handles |
| HE | Hydrometer Eye | M6 | M6 |
| M8-DT | Automotive Post & Stud (1.25mmx15mm Stud I) | M8 | 1.25mmx15mm Stud I |
| OLT | Offset Lug Terminal | PT | Pencil Terminal |
| RT | Recessed Terminal | RPH | Rope Handles |
| RTH | Retractable Handles | STD | Standard Terminal |
| ST | Side Terminal | TS | Top Stud Terminal |
| UT | Universal | WNT | Wingnut |
| A (6 Volts) |
|
| C (12 Volts) |
|
| D (12 Volts) |
|
| E (12 Volts) |
|
| F (12 Volts) |
|
| G (12 Volts) |
|
| H (12 Volts) |
|
| Make | Model | Year |
Yes, the MFM50 is specifically designed as a marine battery for boating and watercraft use.
No, it features enhanced maintenance-free technology for easy, hassle-free use.
Yes, it is built with a vibration-resistant design for durability in marine conditions.
The MFM50 is backed by a 24-month warranty for added reliability.
Current Selection
12V 80AH Marine Battery
Need to find a compatible battery for your vehicle?
Find a Battery
12V 90AH Marine Battery
The MFM70 is a robust marine battery engineered to deliver reliable starting power and consistent performance in demanding marine environments. Designed with enhanced maintenance-free technology, it provides dependable energy output without the need for regular servicing. Whether powering boat engines or essential onboard systems, the MFM70 ensures smooth and reliable operation on every journey.
Built for durability, the MFM70 features a vibration-resistant construction that withstands the harsh conditions of marine use, including constant movement and rough waters. Its strong internal design supports long-lasting performance and dependable cranking power when you need it most. Backed by a 24-month warranty, the MFM70 offers peace of mind and trusted reliability for serious boating applications.
Enhanced maintenance free
Vibration resistant
Reliable starting power
The Supercharge MFM70 Battery is available through our nationwide dealer network across Australia. Contact your local store for pricing, availability, and professional advice.
Find a DealerExplore our full range of marine application batteries designed for reliable performance on the water.
Browse Marine Batteries| Size | N70 |
| Volts | 12V |
| Technology | SMF CAL |
| CCA | 750 |
| RC | 160 |
| AH | 90 |
| Length, mm | 304 |
| Width, mm | 173 |
| Height, mm | 203 |
| Total Height, mm | 224 |
| Assembly | D |
| Post Type | DST |
| Ledge | FL |
| Accessibility | TS |
| Hydro Eye | YES |
| Base Warranty (Private Use) | 24 months |
| Warranty (Commercial Use) | 24 months |
| AP | Automotive Post | CV | Central Venting |
| CT | Centered Terminal | DFA | Dual Fit Aligned Terminals |
| DFP | Dual Fit Parallel Terminals | DST | Dual System Terminals |
| DT | Automotive Post & Stud | DWNT | Dual Wingnut |
| EL | End Ledge | ELPT | Embedded Low Profile |
| EUTR | Embedded Universal/Reverse | F1 | F1 Terminal |
| F1-F2 | F1/F2 Terminal | F2 | F2 Terminal |
| F3 | F3 Terminal | F3W | F3W Terminal |
| F5 | F5 Terminal | F8 | F8 Terminal |
| F9 | F9 Terminal | F10 | F10 Terminal |
| F10M8 | F1 Terminal (1.25mmx15mm Stud I) | F11 | F11 Terminal |
| F11M6 | F11 Terminal (6mm/8mm Insert) | F12 | F12 Terminal |
| F12M8 | F12 Terminal (1.25mmx15mm Stud I) | F13 | F13 Terminal |
| F14M8 | F14 Terminal (1.25mmx15mm Stud I) | F14 | F14 Terminal |
| F18 | F18 Terminal | F22 | F22 Terminal |
| FL | Front Ledge | FDH | Fold Down Handles |
| HE | Hydrometer Eye | M6 | M6 |
| M8-DT | Automotive Post & Stud (1.25mmx15mm Stud I) | M8 | 1.25mmx15mm Stud I |
| OLT | Offset Lug Terminal | PT | Pencil Terminal |
| RT | Recessed Terminal | RPH | Rope Handles |
| RTH | Retractable Handles | STD | Standard Terminal |
| ST | Side Terminal | TS | Top Stud Terminal |
| UT | Universal | WNT | Wingnut |
| A (6 Volts) |
|
| C (12 Volts) |
|
| D (12 Volts) |
|
| E (12 Volts) |
|
| F (12 Volts) |
|
| G (12 Volts) |
|
| H (12 Volts) |
|
| Make | Model | Year |
Yes, the MFM70 is specifically designed as a marine battery for boats and watercraft.
No, it features enhanced maintenance-free technology for hassle-free operation.
Yes, its vibration-resistant design makes it ideal for harsh and rough water environments.
The MFM70 comes with a 24-month warranty for added reliability.
Current Selection
12V 90AH Marine Battery
Need to find a compatible battery for your vehicle?
Find a Battery