Golf Carts & Electric Vehicle Batteries

A deep-cycle battery is designed to provide a steady amount of current over a long period of time.

These Golf Carts & EV batteries are designed to be regularly deeply discharged using most of their capacity time after time, and the plates are much thicker compared to the starting battery. Deep cycle lead acid flooded batteries usually have approx. 3% antimony lead alloy thus increasing the cycling capacity.

Deep cycle absorbed glass mat batteries are still lead-acid batteries but are sealed instead of vented. They are sealed with a rubber valve that releases excess pressure during charging. The electrolyte is held captive in a fibreglass mat that cannot be spilled. This glass mat also provided pockets that assist in the recombination of Hydrogen and Oxygen gasses( that are generated during charging) back into the water.

Gelled batteries contain acid that has been “gelled” by the addition of Silica Gel.

Trojan Golf Carts & EV

Find Out More

Ritar Golf Carts & EV

Find Out More

Motivaction Golf Carts & EV

Find Out More

GolfMaster

Find Out More

DC12-100AMG DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-100AMG
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F10
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-100AMG from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-100S DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-100S (RA12-100SD)
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
306.5mm
Width:
168.5mm
Height:
210mm
Total Height:
215mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-100S from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-120SA DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-120SA (DC120-12S)
Nominal Voltage:
12VV
AH(20hr):
120AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-120SA from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-120S DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-120S (RA12-120SD)
Nominal Voltage:
12VV
AH(20hr):
120AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-120S from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG6-200S DG Series Battery by Ritar for Solar, Wind, UPS, Telecom & Golf Cart Applications.

DG6-200S
Nominal Voltage:
6VV
AH(20hr):
200AH
Length:
260mm
Width:
180mm
Height:
245mm
Total Height:
252mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG6-200S from Ritar’s DG Series is engineered for cyclic use in extreme conditions, featuring a patented grid, high-porosity separator, robust container & safety valve.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG6-225S DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG6-225S (RA6-225SDG)
Nominal Voltage:
6VV
AH(20hr):
225AH
Length:
243mm
Width:
187mm
Height:
275mm
Total Height:
275mm
Battery Type:
Maintenance Free
 
 
Post Style:
F14
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG6-225S from Ritar’s DG Series is engineered for cyclic use in harsh conditions, featuring a patented dual grid, high-porosity PE separator & safety valve for superior performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG12-100 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG12-100 (RA12-100DG/NC)
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG12-100 from Ritar’s DG Series is built for cyclic charge/discharge in extreme conditions, featuring a patented grid, high-porosity PE separator and safety valve.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

M105* Flat Plate Battery by Motivaction for Industrial Applications.

M105*
Nominal Voltage:
6V
Size:
GC2
AH(20hr):
220
Length:
261mm
Width:
181mm
Height:
245mm
Total Height:
272mm
Battery Type:
Maintainable
 
 
Technology:
MAINT CYCLING
Accessibility:
ACC
Post Style:
TM
Assembly:
A
Warranty Comm:
12mths
Warranty Priv:
12mths

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

M105* from Motivaction’s Flat Plate range delivers reliable industrial power using proven lead acid technology, improved design & robust tank construction for dependable performance.

Find the nearest authorized dealer to purchase your batteries or get expert advice.

Explore the Supercharge Superguide to Car Batteries – Types, Tips, and Maintenance Explained!

Explore the Supercharge Vehicle Fitment Guide – Find the Perfect Battery for Your Vehicle with Ease!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

M875* Flat Plate Battery by Motivaction for Industrial Applications.

M875*
Nominal Voltage:
8V
Size:
GC8
AH(20hr):
165
Length:
261mm
Width:
181mm
Height:
245mm
Total Height:
276mm
Battery Type:
Maintainable
 
 
Technology:
MAINT CYCLING
Accessibility:
ACC
Post Style:
TM
Assembly:
A
Warranty Comm:
12mths
Warranty Priv:
12mths

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

M875* from Motivaction’s Flat Plate range delivers reliable industrial power using proven lead acid technology. Its improved design and robust tank construction ensure consistent performance.

Find the nearest authorized dealer to purchase your batteries or get expert advice.

Explore the Supercharge Superguide to Car Batteries – Types, Tips, and Maintenance Explained!

Explore the Supercharge Vehicle Fitment Guide – Find the Perfect Battery for Your Vehicle with Ease!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

M105 Flat Plate Battery by Motivaction for Industrial Applications.

M105
Nominal Voltage:
6V
Size:
GC2
RC @ 75A:
115
AH(20hr):
225
Length:
261mm
Width:
181mm
Height:
245mm
Total Height:
278mm
Battery Type:
Maintainable
 
 
Technology:
MAINT CYCLING
Accessibility:
ACC
Post Style:
TM
Assembly:
A
Warranty Comm:
12mths
Warranty Priv:
12mths
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

M105 from Motivaction’s Flat Plate range delivers reliable industrial power using proven lead acid technology, improved design, and robust tank construction for dependable performance.

Find the nearest authorized dealer to purchase your batteries or get expert advice.

Explore the Supercharge Superguide to Car Batteries – Types, Tips, and Maintenance Explained!

Explore the Supercharge Vehicle Fitment Guide – Find the Perfect Battery for Your Vehicle with Ease!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share