Marine Batteries

SuperCharge Batteries offer longer life, more power and performance with maximum durability and reliability. 
With over 95 years experience Ramcar produces SuperCharge in its world-class facilities in the Philippines.

The SeaMaster marine battery range is the leader in marine batteries. With Expanded Grid Technology (EXG), exceptional marine cranking (MCA) and energy/capacity (RC and AH), the SeaMaster gives boating enthusiasts the power needed to meet the demands of their marine application and optimal vibration resistance to meet the challenges of rough seas.

What is so special about EXG? The benefits are many. The construction of the calcium plates in super compressed rolled strips creates a dense grid pattern allowing for a more compact unit. It is less susceptible to heat corrosion and delivers more efficient cranking power. Also, as the EXG plates are shorter and have minimal gassing, there is less water loss and no acid top up is required.

Compared to ordinary gravity-cast grids, EXG calcium grids have a more compact grain structure and are inherently stronger. This makes them less prone to heat and corrosion and ensures a more efficient current conductivity and cranking power, as substantiated by the battery’s superior specification ratings.

SuperCharge SeaMaster

Find Out More

AMP-TECH Marine

Find Out More

Ritar Marine

Find Out More

Trojan Marine

Find Out More

EV12-75 EV Series Battery by Ritar for Electric Motorcycles, Electric Bikes, Golf Carts, Wheelchairs & Electric Tractors Applications.

EV12-75 (RA12-75EV)
Nominal Voltage:
12VV
AH(20hr):
75AH
Length:
260mm
Width:
169mm
Height:
211mm
Total Height:
216mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

EV12-75 from Ritar’s EV Series is designed for light electric vehicles, featuring a patented deep cycle formula and a high-performance AGM separator for exceptional cycle life and recovery.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

EV12-145 EV Series Battery by Ritar for Electric Motorcycles, Electric Bikes, Golf Carts, Wheelchairs & Electric Tractors Applications.

EV12-145 (RA12-145EV)
Nominal Voltage:
12VV
AH(20hr):
145AH
Length:
340mm
Width:
173mm
Height:
280mm
Total Height:
285mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

EV12-145 from Ritar’s EV Series is made for light EVs, featuring a patented deep cycle formula and high-performance AGM separator for superb cycle life and recovery.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

EV12-215 EV Series Battery by Ritar for Electric Motorcycles, Electric Bikes, Golf Carts, Wheelchairs & Electric Tractors Applications.

EV12-215 (RA12-210EV)
Nominal Voltage:
12VV
AH(20hr):
215AH
Length:
382mm
Width:
179mm
Height:
351mm
Total Height:
370mm
Battery Type:
Maintenance Free
 
 
Post Style:
F22
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

EV12-215 from Ritar’s EV Series is designed for light electric vehicles, featuring a patented deep cycle formula and a high-performance AGM separator for exceptional cycle life and recovery.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-80 DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-80 (RA12-80D)
Nominal Voltage:
12VV
AH(20hr):
80AH
Length:
350mm
Width:
167mm
Height:
182mm
Total Height:
182mm
Battery Type:
Maintenance Free
 
 
Post Style:
F5
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-80 from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power and control applications, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-100SA DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-100SA (DC100-12S)
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
306.5mm
Width:
168.5mm
Height:
210mm
Total Height:
215mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-100SA from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-100AMG DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-100AMG
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F10
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-100AMG from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-100S DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-100S (RA12-100SD)
Nominal Voltage:
12VV
AH(20hr):
100AH
Length:
306.5mm
Width:
168.5mm
Height:
210mm
Total Height:
215mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-100S from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-120SA DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-120SA (DC120-12S)
Nominal Voltage:
12VV
AH(20hr):
120AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-120SA from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-120S DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-120S (RA12-120SD)
Nominal Voltage:
12VV
AH(20hr):
120AH
Length:
328mm
Width:
172mm
Height:
215mm
Total Height:
220mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-120S from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-150 DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-150 (RA12-150D)
Nominal Voltage:
12VV
AH(20hr):
150AH
Length:
483mm
Width:
170mm
Height:
241mm
Total Height:
241mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-150 from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share