Marine Batteries

SuperCharge Batteries offer longer life, more power and performance with maximum durability and reliability. 
With over 95 years experience Ramcar produces SuperCharge in its world-class facilities in the Philippines.

The SeaMaster marine battery range is the leader in marine batteries. With Expanded Grid Technology (EXG), exceptional marine cranking (MCA) and energy/capacity (RC and AH), the SeaMaster gives boating enthusiasts the power needed to meet the demands of their marine application and optimal vibration resistance to meet the challenges of rough seas.

What is so special about EXG? The benefits are many. The construction of the calcium plates in super compressed rolled strips creates a dense grid pattern allowing for a more compact unit. It is less susceptible to heat corrosion and delivers more efficient cranking power. Also, as the EXG plates are shorter and have minimal gassing, there is less water loss and no acid top up is required.

Compared to ordinary gravity-cast grids, EXG calcium grids have a more compact grain structure and are inherently stronger. This makes them less prone to heat and corrosion and ensures a more efficient current conductivity and cranking power, as substantiated by the battery’s superior specification ratings.

Supercharge Seamaster

Find Out More

Amp-Tech Marine

Find Out More

Ritar Marine

Find Out More

Trojan Marine

Find Out More

SuperCharge SeaMaster Gold

Find Out More

DC12-150 DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-150 (RA12-150D)
Nominal Voltage:
12VV
AH(20hr):
150AH
Length:
483mm
Width:
170mm
Height:
241mm
Total Height:
241mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-150 from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-200 DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-200 (RA12-200D)
Nominal Voltage:
12VV
AH(20hr):
200AH
Length:
522mm
Width:
240mm
Height:
219mm
Total Height:
224mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-200 from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom, electric power & control systems, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DC12-260 DC Series Battery by Ritar for Solar, Industrial, Marine, UPS & Golf Cart Applications.

DC12-260 (RA12-260D)
Nominal Voltage:
12VV
AH(20hr):
260AH
Length:
521mm
Width:
268mm
Height:
220mm
Total Height:
225mm
Battery Type:
Maintenance Free
 
 
Post Style:
F14
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DC12-260 from Ritar’s DC Series delivers a superior deep cycle design for solar, wind, UPS, telecom and electric power applications, ensuring reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG6-200S DG Series Battery by Ritar for Solar, Wind, UPS, Telecom & Golf Cart Applications.

DG6-200S
Nominal Voltage:
6VV
AH(20hr):
200AH
Length:
260mm
Width:
180mm
Height:
245mm
Total Height:
252mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG6-200S from Ritar’s DG Series is engineered for cyclic use in extreme conditions, featuring a patented grid, high-porosity separator, robust container & safety valve.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG6-225S DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG6-225S (RA6-225SDG)
Nominal Voltage:
6VV
AH(20hr):
225AH
Length:
243mm
Width:
187mm
Height:
275mm
Total Height:
275mm
Battery Type:
Maintenance Free
 
 
Post Style:
F14
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG6-225S from Ritar’s DG Series is engineered for cyclic use in harsh conditions, featuring a patented dual grid, high-porosity PE separator & safety valve for superior performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG6-335 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG6-335
Nominal Voltage:
6VV
AH(20hr):
335AH
Length:
295mm
Width:
178mm
Height:
346mm
Total Height:
351mm
Battery Type:
Maintenance Free
 
 
Post Style:
F12
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG6-335 from Ritar’s DG Series is designed for extreme cyclic use with a patented dual grid, high-porosity PE separator, robust safety valve, and durable container.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG12-33 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG12-33
Nominal Voltage:
12VV
AH(20hr):
33AH
Length:
195mm
Width:
130mm
Height:
155mm
Total Height:
168mm
Battery Type:
Maintenance Free
 
 
Post Style:
F11
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG12-33 from Ritar’s DG Series is designed for demanding cyclic applications, featuring a patented grid, high-porosity PE separator, and safety valve for optimal performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG12-40 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG12-40
Nominal Voltage:
12VV
AH(20hr):
40AH
Length:
198mm
Width:
166mm
Height:
169mm
Total Height:
169mm
Battery Type:
Maintenance Free
 
 
Post Style:
F11
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG12-40 from Ritar’s DG Series is built for extreme cyclic applications, featuring a patented grid, high-porosity separator and safety valve for reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG12-55 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG12-55 (RA12-55DG)
Nominal Voltage:
12VV
AH(20hr):
55AH
Length:
229mm
Width:
138mm
Height:
211mm
Total Height:
216mm
Battery Type:
Maintenance Free
 
 
Post Style:
F11
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG12-55 from Ritar’s DG Series is engineered for challenging cyclic applications in harsh conditions, featuring a patented grid design, high-porosity separator, and a premium safety valve for reliable performance.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share

DG12-75 DG Series Battery by Ritar for Solar, Industrial, Marine, UPS, Telecom & Golf Cart Applications.

DG12-75
Nominal Voltage:
12VV
AH(20hr):
75AH
Length:
260mm
Width:
169mm
Height:
211mm
Total Height:
216mm
Battery Type:
Maintenance Free
 
 
Post Style:
F11
Datasheet

Abbreviations and Battery Assemblies

Battery Assembly

AP: Automotive Post

CV: Central Venting

CT: Centered Terminal

DFA: Dual Fit Aligned Terminals

DFP: Dual Fit Parallel Terminals

DST: Dual System Terminals

DT: Automotive Post & Stud

DWNT: Dual Wingnut

EL: End Ledge

ELPT: Embedded Low Profile

EUTR: Embedded Universal/Reverse

F1: F1 Terminal

F1-F2: F1/F2 Terminal

F2: F2 Terminal

F3: F3 Terminal

F3W: F3W Terminal

F5: F5 Terminal

F8: F8 Terminal

F9: F9 Terminal

F10: F10 Terminal

F10M8: F1 Terminal (1.25mmx15mm Stud I))

F11: F11 Terminal

F11M6: F11 Terminal (6mm/8mm Insert)

F12: F12 Terminal

F12M8: F12 Terminal (1.25mmx15mm Stud I)

F13: F13 Terminal

F14: F14 Terminal

F14M8: F14 Terminal (1.25mmx15mm Stud I)

F18: F18 Terminal

F22: F22 Terminal

F3: F3 Terminal

F5: F5 Terminal

F9: F9 Terminal

FL: Front Ledge

FDH: Fold Down Handles

HE: Hydrometer Eye

M6: M6

M8: 1.25mmx15mm Stud I

M8-DT: Automotive Post & Stud (1.25mmx15mm Stud I)

OLT: Offset Lug Terminal

PT: Pencil Terminal

RT: Recessed Terminal

RPH: Rope Handles

RTH: Retractable Handles

STD: Standard Terminal

ST: Side Terminal

TS: Top Stud Terminal

UT: Universal

WNT: Wingnut

DG12-75 from Ritar’s DG Series is built for demanding cyclic use in harsh conditions, featuring a patented grid, high-porosity PE separator and robust safety valve.

Experience innovation across telecommunications, electric vehicles, UPS, inverters, forklifts, and solar sectors. Our cutting-edge solutions boost performance and power your industry. Explore our offerings now!

Check and Register your car battery now for an extended warranty – Protect your investment today!

Share